LARGEST CERTIFIED
SMARTCOAT™ IN USA.
Structúr is proud to be the largest certified CertainTeed SMARTCOAT™ contractor in the USA.
Liquid-applied roof restoration has been the fastest growing segment of low-slope roofing. WHY?
Financials.
Opting for roof restoration instead of tear-off labor can lead to a reduction in project costs by up to 40%. Additionally, coatings are considered maintenance, offering tax advantages for building owners. Moreover, the bright-white, reflective nature of a roof contributes to energy-cost savings.
Environmental impact.
Rapidly increasing energy needs and the proliferation of industrial waste pose significant threats to our delicate ecosystem and precious natural resources. Opting for coating systems over the more resource-intensive process of removing and replacing with factory-made, less eco-friendly alternatives offers a more sustainable solution with a reduced environmental footprint
Meet SMARTCOAT™
A comprehensive line of high-performance restoration products, stocked locally with the support contractors need, and the warranty coverage building owners expect.
Restoration with SMARTCOAT is a 3 or 4-part process:
100 Roof Wash
Nothing sticks to dirt. Help your customers avoid call backs by starting with a clean slate.
(only as needed)
200 Series Primer and Bleed Blocker
Our universal primer is engineered to optimize critical adhesion interfaces across a variety of substrates, when needed.
300 Series Mastics and Sealant
If your mastics don’t have the muscle to permanently seal leaks, your restoration project will miss the mark.
REINFORCE
500 Series SMARTFAB™ Polyester
Reinforce seams, details, and acrylic roof systems.
Our SMARTCOAT application proccess
Clean
100 Roof Wash
Nothing sticks to dirt.
Avoid call backs by starting with a clean slate.
SMARTCOAT 100 Roof Wash is a highly versatile industrial cleaner and degreaser intended
for application to all types of roofs prior to power washing in preparation for the application of SMARTCOAT Primer, Mastic, and/or Coatings. This product lifts dirt and grease from the surface of the roof, including small pores and irregularities. SMARTCOAT 100 is both a safer and more sustainable alternative to toxic cleaners, bleaches, and solvents. The concentrated formula cleans, degreases, and deodorizes without harsh chemicals. The formula is non-toxic, non-abrasive, non-corrosive, and safe for use on all water-safe washable surfaces.
Coverage
Use as is or dilute with hot or cold water as shown below:
Ratio = Measurement of #100 to water, example “1:10” = 1 Quart #100 to 10 Quarts Water.
HEAVY DUTY (thick grease/oil): Up to 1:10 dilution
MEDIUM DUTY (dirt/grime/grease/oil): 1:10 to 1:30 dilution
LIGHT CLEANING (dust/light oil/residue): 1:30+ dilution
PRIME/PREP
200 Series Primer and Bleed Blocke
SMARTCOAT 200 Series products are used in scenarios where surface priming or preparation is recommended or required before applying SMARTCOAT 400 Series Acrylic and Silicone Coatings:
It is best practice to conduct an adhesion analysis on every project, in accordance with
the SMARTCOAT Field Adhesion Test protocol. If needed, SMARTCOAT 210 Universal
Primer will enhance adhesion to most roofing substrates.
COVERAGE
SMARTCOAT 210 5G: 1G per 100 square feet
When restoring with 450 Silicone, it is best practice to prepare an existing bituminous roof surface with SMARTCOAT 200 Asphalt Bleed Blocker, a water-based formulation manufactured with premium acrylic resins designed to block bituminous oil exudate or “bleed-through” from staining SMARTCOAT 400 series coatings. Use of the SMARTCOAT 200 Asphalt Bleed Blocker is recommended on acrylic restorations; it is required for silicone restorations. Highly aged, weathered, or brittle asphaltic surfaces may be rejuvenated with SMARTCOAT 220 Asphalt Emulsion prior to coating.
COVERAGE
SMARTCOAT 200 5G: 1G-1.5G per 100 square feet, depending on surface porosity
SMARTCOAT 220 5G, 55G: 6-8G per 100 square feet
SEAL
300 Series Mastics and Sealan
If your mastics don’t have the muscle to permanently seal leaks, your “restoration” project won’t last.
SMARTCOAT 300/301/350/365 Mastics seal deficiencies in the roof’s surface prior to coating. When a caulk bead is preferred, or a damp surface in play, SMARTCOAT 370 UltraSeal MS Polymer Sealant gets the job done.
Professional-grade high performing silicone mastic. Suitable for application to metal, bituminous, and most single-ply roofs — and it goes down like a dream (we’re told). Upon cure, forms a durable, breathable, and water-resistant barrier that is resistant to degradation from UV and natural weathering; coating is not required.
COVERAGE
12-13 sq.ft. per gallon applied 1/8” thick; additional material may be required when 3-coursing to saturate and encapsulate polyester fabric.
Silyl-modified polyether high-performance, multipurpose, low-VOC, single-component adhesive/ sealant designed for bonding and sealing a wide range of porous and non-porous construction materials. Not intended for use on TPO. Paintable by latexbased paints or SMARTCOAT 400 Series Coatings approximately one hour after application. Will not crack, shrink, or peel. Easy to gun and tool for quick application.
COVERAGE
Approximately 25 lineal feet for ¼” width and ¼” depth joint.
When you want a repair that’s more than a patch, #365 is your go-to. This year-round permanent repair silicone mastic can be applied to damp surfaces and as low as 32°F. Seals asphalt, metal, single-ply and most coating surfaces. UV-stable, coating is not required.
COVERAGE
12-13 sq.ft. per gallon applied 1/8” thick; additional material may be required when 3-coursing to saturate and encapsulate polyester fabric.
Reinforce seams and details with SMARTFAB 500
Stitchbond Polyester.
Available in 4″, 6″, 12″, and 20″
COAT
400 Series Coatings
SMARTCOAT 450 HIGH SOLIDS SILICONE COATING (5G, 55G) – WHITE/LIGHT GRAY/DARK GRAY/ SANTA FE TAN/BLACK*
100% silicone-based, solvent free, single-part roof coating. Creates a vapor-permeable membrane, adaptive to temperature extremes, UV resistant, watertight, and weatherproof. Outstanding ponded water resistance for direct bond over horizontal and vertical surfaces. May be used to re-coat existing silicone roof coatings and existing acrylic roof coatings. Meets or exceeds ASTM D 6694.
COVERAGE
1.5 – 2.5 gallons per 100 square feet, specification and warranty duration dependent.
Reinforce acrylic roof systems with SMARTFAB 501
Stichbond Polyester
Available in 40″ width
SMARTCOAT™ Limited Warranties
CertainTeed offers a range of Limited Warranties for SmartCoat Acrylic or Silicone restoration projects. Existing CertainTeed low-slope asphaltic roof systems that qualify for a SMARTCOAT restoration are issued CertainTeed Asphaltic Membrane (NDL) Limited Warranty, SMARTCOAT Extensions. SMARTCOAT roof restorations applied to preexisting non-CertainTeed roof systems are limited to SMARTCOAT Limited (NDL) Warranties.
For more information and warranty protocol visit certainteed.com/smartcoat.
